6 MW String Turnkey Station With Transformer Integrated
Applicated Reference
Wind power Station
PV Power Station
Generator Factory
Island
Large-scale
Industrial User
Intelligent and efficient
- PCS plug-and-play functionality, enabling online maintenance
- Independent thermal management per module with thermosiphon and internal circulation technologies for cooling
- PCS maximum conversion efficiency of 99%; transformer peak conversion efficiency of up to 99.57%
Safe and reliable
- Active balancing BMS and individual pack charge/ discharge to avoid capacity loss and circulating current risks
- 16-unit parallel circulating current being less than 5% of average parallel current
- IP54 for the whole device; IP65 for the PCS
Cost-effective
- Modular design for flexible configuration per customer needs
- Integrated in a 20-foot standard container, enabling
- efficient transportation
- Customized solution for 6 MW multi-unit parallel operation
Model: IPS600-07P-6000-U-EU — Parameters
| Item | Specification |
|---|---|
| DC Side | |
| Maximum DC voltage | 1500 V |
| DC voltage for full performance | 1070 V to 1500 V |
| Maximum DC current | 358 A × 16 |
| Number of battery clusters | 16 |
| AC Side (Grid-Connected) | |
| Rated power | 6000 kVA (incl. battery compartment & auxiliary transformer) |
| Rated grid voltage | 20 kV to 35 kV |
| Rated grid frequency | 50 Hz / 60 Hz * |
| Total harmonic distortion of current (THD) | < 3% (at rated power) |
| Reactive power range | −1.05 (lead) to +1.05 (lag) |
| Power factor | −1 (lead) to +1 (lag) |
| AC connection method | Three-phase three-wire |
| Off-Grid Output | |
| Rated output frequency | 50 Hz / 60 Hz * |
| Voltage variation | < 1% UN (linear balanced load) |
| Total harmonic distortion of voltage | < 3% (linear load) |
| Voltage unbalance degree | PCS output voltage unbalance: < 2% or ≤ 4% (short time) |
| System | |
| Cooling method | Naturally ventilated (transformer) / Intelligent air cooling (PCS) |
| Allowable ambient temperature | −40 °C to +60 °C (derating above +50 °C) |
| Allowable relative humidity | 0% to 100% (non-condensing) |
| Cable inlet mode | Bottom-in and bottom-out |
| Dimensions (W × D × H) | 6058 mm × 2438 mm × 2896 mm (oil-immersed transformer) |
| Mass | Approx. 30,000 kg |
| Maximum operating altitude | 3000 m (derating above 2000 m) |
| Ingress protection | IP54 (whole device) / IP65 (PCS) |
| Communication | |
| Interfaces | RS485, CAN, Ethernet, CAN 2.0B |
| Protocols — Standard | Modbus-RTU / CAN 2.0B |
| Protocols — Optional | Modbus-TCP, IEC 61850, EtherCAT |
* Customized based on requirements.
Worldwide shipping
We ship our equipment worldwide.
Contact us and we will solve any issue concerning logistics.